As a rule, the hangers should be placed on the vertical arms of the frame, directly across from one another, between 1/4 and 1/3 of the total height down from the top of the artwork. Where the hardware is placed is also important. They are hammered or stapled onto the top arm of the frame. One is used for very small pieces, while two or three can be distributed across long, narrow panoramas. When in doubt, too much strength is better than too little.ĭepending on the size and weight of the artwork, you may need a single hole D-ring (about 20 lbs), a double hole D-ring (about 40 lbs), or a steel plate hanger (50-100 lbs, depending on style).įor very small or lightweight artwork, a sawtooth hanger may be suitable. When selecting hanging hardware, it is important to choose hangers that are designed to hold as much or more weight than the weight of the artwork. Start your order from our Fine Art Prints or Custom Picture Frames page. Just like canvas prints, bumpers are placed in the bottom corners to protect the wall.įor attaching hardware to metal frames, see our Assembling a Metal Frame article. If turn buttons were used instead, and you may be changing out the artwork in the future, tape is not necessary. This keeps dust and bugs from working their way between the layers of the artwork, and produces a neat finish. The framer's points can be hidden by applying brown paper tape to cover both the back of the frame, and the backing board. To learn more about this process, visit our Frame Fitting article. Once the contents of the frame are in place, turn buttons or framer's points are placed at equal increments around the back of the frame, holding the contents in.
Start your order from our Canvas Prints page.
If you are stretching your canvas print at home, you can purchase cloth tape from out Art Supply Store. They prevent the piece from scuffing the wall. This makes the back side neat and crisp, and prevents dust and bugs from getting between the staples.Īnother finishing option is to place brown kraft paper across the back, affixing it with double-sided tape.Īfter the back is cleaned up, felt, foam or rubber bumpers (small circles or squares of material with adhesive backing) are affixed to the bottom corners of the artwork. Once the canvas print has been been stretched (for more information on that process, see our How It's Made article), cloth tape is applied to the back edges of the canvas and frame.
#PHOTOFRAME WITH TIE HOW TO#
This article explains how to apply hanging wire to the back of a picture frame or canvas print, as well as a brief overview of finishing and attaching hanging hardware.Īfter the print has been framed or mounted, but before the hanging hardware and wire are added, a few steps are taken to ensure you receive a professional, properly protecting piece of art.
If you order frames you'll be fitting yourself, or canvas prints you'll be stretching at home, this guide is a useful outline for ensuring your artwork stays safely up on your wall for years to come. Your hardware must be strong enough to hold the piece, and the wire must be tightly wrapped to avoid slipping and unravelling.Īt KeenART Media, we apply hanging hardware and wire to all artwork that is finished in our warehouse. It's important not to rush the hanging hardware and wire application, however. Once your framed artwork or canvas print has been mounted, you'll no doubt be in a hurry to get it up on the wall. Contact KeenART Turnaround time Shipping Rush Orders Products & Pricing ->